Home » Products » Sewing Accessories » Sewing Machine Feet » High Shank – Free Motion Darning Guide Foot

High Shank - Free Motion Darning Guide Foot


In stock

Sewing bee fabrics haberdashery and ribbons


This is a screw-on presser foot for high shank industrial sewing machines. It is a sprung free motion foot (also known as a darning foot) that moves with the sewing machine. It allows you to sew in any direction which is perfect for “drawing” with your sewing machine. This is especially useful for projects like sewing machine embroidery, applique and quilting. The clear guide base has a grid marked out which has ¼ inch (approx 6mm) between squares. This makes it easier to follow a set distance. For example, if you wish to sew repeated lines of quilting or keep an exact spacing around a fabric pattern or applique. The open toe front (opening in the grid in front of the needle position) allows you to more quickly pass the thread through your sewing machine foot. You may find that you need to lower or cover your sewing machine feed dogs to use this foot more effectively.

High shank sewing machines are generally industrial style sewing machines. If you aren’t sure if this will fit your machine, check out our sewing machine feet guide.


Recommended ReadingSewing Machine Feet Guide


Additional information



Sewing Machine Fitting

All fabrics will be cut as a continuous piece unless you ask us otherwise. In the unlikely event this isn’t possible we will always contact you first. 

Our fabrics are all hand cut with care, never torn.

We recommend that all of our fabrics are washed at 30°c or below to improve fabric durability and colour vibrancy.

We try to match the colours in our photos as closely as possible but some differences may occur.

Size Guide & Conversion

1 Metre = approx. 39  Inches

Half Metre = approx. 19 ½ Inches

Fat Quarter = approx. 50cm x 40-50cm

(approx. 19½ Inches x 15 ¾ – 19½ Inches)