Home » Products » Sewing Accessories » Sewing Machine Feet » Low Shank – Ruffler Foot

Low Shank - Ruffler Foot


In stock

Sewing bee fabrics haberdashery and ribbons


This screw-on presser foot allows you to sew ruffles and gathers. Fabric can be fed through the guide to either sew into ruffles alone or to attach to a flat fabric that can be passed underneath the sewing machine foot at the same time. The depth and frequency of the gathers or ruffles can be adjusted with the 2 sets of setting options (one above at the back and the other on the side). Please note that the fabric can be pulled through very quickly with some of the settings, so it is worth practising on some scrap fabrics first until you are more used to it. This sewing machine foot comes boxed with usage instructions.

This is a low shank (Universal Fit) screw fitting. This type of foot will attach to low shank sewing machines. This includes most standard domestic sewing machines e.g. Brother, Janome, Toyota. If you aren’t sure if this will fit your machine, check out our sewing machine feet guide.


Recommended ReadingSewing Machine Feet Guide

Additional information


Sewing Machine Fitting

All fabrics will be cut as a continuous piece unless you ask us otherwise. In the unlikely event this isn’t possible we will always contact you first. 

Our fabrics are all hand cut with care, never torn.

We recommend that all of our fabrics are washed at 30°c or below to improve fabric durability and colour vibrancy.

We try to match the colours in our photos as closely as possible but some differences may occur.

Size Guide & Conversion

1 Metre = approx. 39  Inches

Half Metre = approx. 19 ½ Inches

Fat Quarter = approx. 50cm x 40-50cm

(approx. 19½ Inches x 15 ¾ – 19½ Inches)