Home » Products » Sewing Accessories » Sewing Machine Feet » Singer Slant Shank Snap on – Rolled Hem Foot

Singer Slant Shank Snap on - Rolled Hem Foot


In stock

Sewing bee fabrics haberdashery and ribbons


This foot will fit old style Singer sewing machines which have a slanted bar that the snap-on adaptor or screw-on feet attach to. If you aren’t sure if this will fit your machine, check out our sewing machine feet guide.

This sewing machine foot helps you to sew very narrow hems ( ⅛ of an inch / approx 3mm). To get the best results, we recommend that you fold the first ½ inch / 1 cm that you plan to sew and finger press it in place, then, with the rolled hem foot sitting on top, sew a couple of stitches. After this, keep the needle down but lift the presser foot. As the fabric is anchored in place, it will make it easier to slide the edge of the fabric into the guide without slipping out of place. Once in place, lower your foot and stitch down while continuing to feed the edge into the guide as you sew.

Recommended ReadingSewing Machine Feet Guide

Additional information


Sewing Machine Fitting

All fabrics will be cut as a continuous piece unless you ask us otherwise. In the unlikely event this isn’t possible we will always contact you first. 

Our fabrics are all hand cut with care, never torn.

We recommend that all of our fabrics are washed at 30°c or below to improve fabric durability and colour vibrancy.

We try to match the colours in our photos as closely as possible but some differences may occur.

Size Guide & Conversion

1 Metre = approx. 39  Inches

Half Metre = approx. 19 ½ Inches

Fat Quarter = approx. 50cm x 40-50cm

(approx. 19½ Inches x 15 ¾ – 19½ Inches)